Archive: 4 posts

---

I don't know if I'm being dumb, but you can control an in/out mover with the analogue stick, and have an object pass smoothly through the layers. You can then keep that object, say, halfway between layer 6 and 7. But is there a way to control the mover so you can change it at the press of a button? I know you can achieve this with fixed layers, i.e, you can move an object between any layer easily, but can you move it half way between a layer and have it stop there?

2016-09-29 13:43:00 Author: ballisticola Posts: 157

---

Good question, I have no idea, but I guess...no!

2016-09-30 10:08:00 Author: CuriousSack Posts: 3981

---

I did a test, and this works: Set the Advanced In/Out mover's Layer Boundaries to 6-7 and set the Input Action to "Positional" Place a Counter with a Target Count of 2 and wire it to the Mover's positional input (you don't need anything connected to the on/off input) When the Counter has a value of 1, your object will be half way between layers 6 and 7

2016-10-01 20:15:00 Author: Pookachoo Posts: 838

---

Cheers! So I was being dumb Because it also works with timers...which was the next part of what I was trying to do. And it's obviously not just half way through the layers. You can do it by 1% increments. It destroys thick and thack. Any object can be placed essentially anywhere between the 16 layers.

2016-10-03 12:56:00 Author: ballisticola Posts: 157

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.