Archive: 2 posts

---

hello, and welcome to the 1/2 speed repeater tutorial when going through this tutorial, note that it is possible to make with a normal repeater (not gate into itself) but this procedure does this effect with no alterations 1) take out a microchip 2) take out a not gate, and put it on the microchip 3) put the not gate's output and hook it up to the enabling of the microchip 4) hook up an input into the not gate, and use the not gate's output as the repeater output now it should work correctly, but if it doesn't it can be achieved with the typical not gate 1) take out a repeater and put it on a microchip so it is activatable 2) take out a counter and hook the not gate into the input of the counter 3) put the counter's output into its reset, and put the counter's value to a max capacity of 2 and it should work just like before and if you do happen to know why the first way works, because it shouldn't, then tell me because I'm curious why it does work in the first place

2013-10-12 17:09:00 Author: amiel445566 Posts: 664

---

HI Amiel445566. I believe it gives a momentery delay because its reading the contents of the chip. If the not gate into intself is completely on the chip, the games programming reads the chips contents and preforms it as a loop with no logic delays. However if part of that loop is off the chip, it must re-read the chips contents each time, creating a slight delay as it activates the chip.

2013-10-13 14:08:00 Author: Sean88 Posts: 662

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.