Archive: 3 posts

---

First off you will need glass (any material works, but it helps to use glass), a 3D rotated Closed level post (Or a LBP1 Jet pack, but the Level post is much more accurate) and plenty of space. 1) You will need to stretch the glass, and keep cutting it down with copy and cut so it stretches, and you will need to stretch it out to the point where its textures are removed 2)Glue the glass to the level post, not the level post to the glass, but the other way around, and then when u glue it try different angles and directions of the level posts to glue it on 3)Then grow the glass and it should go backward or forward, depending on how it is glued to the sign post, and after it is in the 3D layers, then you should be able to use it like a normal 3D tool, and you can make your own 3D tool from this I hope this helps, leave any comments you have below, and I'll be sure to read them

2013-07-23 17:57:00 Author: amiel445566 Posts: 664

---

Pictures, please? And it seems the Closed Level post, as you said, is already 3D. How do we get that?

2013-07-29 18:22:00 Author: Radio447 Posts: 159

---

to get that post you have to twist it with the jetpack from LBP1, its basically the same as the jetpack, but more precise, and all you have to do is twist it with the jetpack at a post starting angle of 85 right and youre done with the post, thanks for asking

2013-08-05 18:23:00 Author: amiel445566 Posts: 664

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.