Archive: 7 posts

---

so my level has become fairly complicated now compared to what i started out with and before, my sackbot would be able to pick up points from any layer, now it only picks up points from the middle layer... also when i have points emitted to the middle layer, sometimes those bubble points are basicly invisible, so if my sackbot goes near them, the bot just passes right through them.... its getting to the point where even though ive put so much work,it makes me feel like just giving up on this... ugh so frustrating, this happen to anyone? any ideas why the sackbot cant pick up points anymore? i havent done anything to the bot it just kinda happend

2013-03-19 01:08:00 Author: Unknown User

---

sorry man, but this is just a thermo bug. things tend to work less in levels when you add a lot more. I'd just split it with level links. Hope this helps.

2013-03-19 18:48:00 Author: qwerty123456 Posts: 309

---

happened to me in my tetris level, at this point i thought bots cant pick up bubbles at all, but it seemed like it was only in that level (probably cause i emitted them?) What i did, i took the bubbles, glued some invisible material on it (thin layer) put a marker sensor (with the range of the bubble size, a bit more tho) on it, connected to a point giver and than added a tag in the sackbots board... voila. Edit: Best put a microchip on it, saves space... and u gotta destroy the bubbles, if collected.

2013-03-19 20:21:00 Author: Rough-Tea Posts: 422

---

On each point bubble, place an impact sensor set to sense a tag on the bot, and hook it to the bubble itself (unless this doesn't work in Vita in which case do what Rough-Tea said above). Then place that tag on the bot and you are done!

2013-03-19 23:50:00 Author: L1N3R1D3R Posts: 13447

---

oh, wait.. i think thats how i done it yes... been a while.. if u cant do it at all i can send u the bot bubble.

2013-03-20 17:10:00 Author: Rough-Tea Posts: 422

---

Awesome I'm going to try both rough tea and line riders suggestion, I'll get back on here if I can't get i t to work, but thanks a lot

2013-03-20 21:46:00 Author: Unknown User

---

Hi guys ! I recently had this problem in my currently platformer project (PLCC5 entry BTW) and I spotted that just bubbles on the mid and back layer were glitched, but I could pick bubbles on front layer normally with the sackbot. After some tries, I found a solution (it works for me) ! You just have to change the layer of the sackboy's starting point, I personally put it on the back layer. Then he will go into the controlinator and the sackbot should work properly. If anyone has this problem at any time, just try this and confirm (or not ) this solution !

2013-04-21 19:47:00 Author: Gwaeron Posts: 170

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.