Archive: 8 posts

---

Hi all, I couldn't find anything using the forum search so apologies if this has been answered elsewhere. Is it possible to have blocks move slooooowly from on layer to the other? In/Out movers seem to just skip them back and fore... Any pointers would be appreciated. Cheers modin

2012-08-04 14:14:00 Author: Unknown User

---

No, the speed at which In/Out Movers move cannot be adjusted.

2012-08-04 14:15:00 Author: Ostler5000 Posts: 1017

---

No, the speed at which In/Out Movers move cannot be adjusted. I was afraid that was the case. Thanks for your fast reply.

2012-08-04 17:02:00 Author: Unknown User

---

mmm... perhaps because you can join all layers together and you have sublayers within layers on the Vita version, movers will be able to have a speed setting?

2012-08-04 17:08:00 Author: GribbleGrunger Posts: 3910

---

I'm not sure it will help, but you might try using a tag follower set to allow in/out movement. You can set the speed on a tag follower, but I don't know if that will affect the in/out speed as well.

2012-08-04 17:50:00 Author: Pookachoo Posts: 838

---

I'm not sure it will help, but you might try using a tag follower set to allow in/out movement. You can set the speed on a tag follower, but I don't know if that will affect the in/out speed as well. I don't think it would make a difference. It would be cool if you could adjust the speed of In/Out movement, though..

2012-08-04 23:06:00 Author: Wolffy123 Posts: 406

---

I'm not sure it will help, but you might try using a tag follower set to allow in/out movement. You can set the speed on a tag follower, but I don't know if that will affect the in/out speed as well. no, the follower speed wont affect layer change speed. followers will make it change layers even if the speed and strength is set to 0. however this is usefull if you only want something to change to the same layer as the player/tag while still moving normally edit: just wanted to point out that both collision and logic wise the layer change is instant, but visually it takes 5 frames per layer

2012-08-05 02:17:00 Author: evret Posts: 612

---

I noticed that you can change the size of the in/out-movers on a sequencer, but that had no effect either, I'm afraid. Ah well, so much for that idea. Thanks to everyone who contributed.

2012-08-05 21:05:00 Author: Unknown User

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.