Archive: 12 posts

---

I'm kinda new to LBP2 so this might be easier then I'm making it out to be.. Basically I'm wanting to make a cursor that is movable with a controlinator thing.. And i can get everything all set up but the only problem is that it wont stay on the camera.. Like if i hold left it'll take off and wont stay in camera view. All i need is some way to keep an object in view of the camera They do it in the story mode.. With the camel thing.. Thats actually exactly what I'm trying to emulate Thanks in advance! EDIT: Oh by the way.. It needs to stay focused on the player.. So the whole movie camera on object thing wont work.. I want it to stay focused on the player and make the object not be able to go out of view of the camera

2012-06-20 03:37:00 Author: Unknown User

---

Start off by drawing an outline of the area you want the cursor to stay in. -Use separate pieces of hologram, one piece covering the bottom, one covering the top, left, and right. Place a Tag on each piece and make them each a different color(you can also name them). Now do what is shown in the picture. -Your left stick should be wired to the direction splitters(Up/Down goes in the top. Left/Right goes in the bottom) 40412 The only thing you will need to tweak is the impact sensors need to be set to require tag and inverted. -(Top to Bottom) Up, Down, Right, Left. If you don't understand something, or it doesn't work, I'll try to help tomorrow.

2012-06-20 04:12:00 Author: Zero10100 Posts: 385

---

Thanks for your reply.. But what is that one thing on the circuit board? I've never seen that before :o

2012-06-20 04:14:00 Author: Unknown User

---

Thanks for your reply.. But what is that one thing on the circuit board? I've never seen that before :o do you mean the advanced mover? it looks like a cross.

2012-06-20 04:16:00 Author: GribbleGrunger Posts: 3910

---

Nooo.. The alien thing haha.. Or is that just a player?

2012-06-20 04:17:00 Author: Unknown User

---

Okay Zero so your suggestion did work.. Partially.. I got it setup and it cant come out as long as someone is on the controllinator and moving it.. The problem is that its on a vehicle.. So all it takes is someone moving vehicle without moving the cursor for it to come out of the boundary.. Any suggestions?

2012-06-20 06:42:00 Author: Unknown User

---

Place the first chip on your cursor, with the old chip. Place the second chip on your vehicle. 40414 -The tag sensors need to be set to Output:Signal Strength. The colors/names of the tags need to be the same as the tags on the next chip and in the same order. You might want to use Up, Down, Right, Left again but of a different color. -The mover needs to be set to 100 speed and 0% deceleration. 40415 -The speed sensors need to be set to 100 and in one direction.(Top to Bottom) Up, Down, Right, Left -Now just tweak the tags to be the same as the detectors on the other chip

2012-06-20 17:56:00 Author: Zero10100 Posts: 385

---

Thanks! I'll try it and get back to you

2012-06-20 18:48:00 Author: Unknown User

---

Okay it doesnt seem to be working.. I might have done something wrong.. What do you mean tweak the tags to be on the same detectors on the other chip? Also how will the tags on the vehicle work if the speed sensors are set to 100.. Unless i go over 100 speed?

2012-06-20 19:04:00 Author: Unknown User

---

The speed sensors will output a percentage that will be picked up by the tag sensors on the other chip, moving the cursor at the same speed as the vehicle(trust me, it works). The tags need to be the same color and name as the tag sensors or they won't detect them. If you built yours like I did, then just name them from top to bottom-Up Down, Right, Left. As long as they are a different color as your boundaries they will still work.

2012-06-20 19:28:00 Author: Zero10100 Posts: 385

---

I sent you a message with a link to how i set mine up.. http://oi48.tinypic.com/33w08kl.jpg It doesnt seem to be doing anything what so ever.. Should i be messing with the radius of the tag sensors?

2012-06-20 19:34:00 Author: Unknown User

---

I just want to thank Zero10100 As he actually went into game with me and helped me out.. Way more then i expected when i posted here( I actually never even expected a reply.. Much less one 10 minutes after i post and all the help I've gotten) Thanks so much and this problem is closed

2012-06-20 20:40:00 Author: Unknown User

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.