Archive: 2 posts

---

No, this isn't another one of those awful Youtube sensations sung my two spoilt teenagers in the back of a limo. This problem relates to the attracto tweaker. In my level, I'm trying to pull a sackbot onto a ledge on the wall which has an attracto tweaker on it. Now, this wall is too far from the sackbot to automatically effect it, even when set to the highest value (the range seems to be a bit rubbish). So what I've done is placed a couple of pieces of holo to pull the sackbot across, with the attracto tweaker on those pieces only activated when the sackbot is to the right of them (the wall is on the left). This works, however I'm sometimes getting a problem where I can't move the sackbot in the air, it just pulls him in a straight line, I'd like him to be able to move to avoid obstacles. I can't figure out what is causing it to prevent me moving the sackbot mid-flight. I've used the same setup in another place and it works fine. I did have that problem in that place before, but for some reason making the holo thicker seemed to do the trick. That's not working this time. If I could just pin point the change I need to make, it'll be a lot better than me having to amend my design to allow for these inconsistencies.... which I really don't want to do.

2012-05-25 14:55:00 Author: Ali_Star Posts: 4085

---

I have also been working with atracto gel, and I've have problems with my sackbots too, they don't behave well. You might try using a tag follower on the sackbot to move him/her to the ledge.

2012-05-25 19:38:00 Author: Pookachoo Posts: 838

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.