Home    LittleBigPlanet 2 - 3 - Vita - Karting    LittleBigPlanet 2    [LBP2] Tutorials
#1

Decided to start it too :D

Archive: 8 posts


Hey guys it's mcdonald1967 here. My aim is to do things other people havent done. Tutorials that people need and what other people havent seen (yet). Show you good levels that are not even known. I think that a lot of people in lbp2 desrve a lot more attention. I hope you guys back me up on this because i could use some support. Thanks so much for reading

Heres a link to my first video on my new channel

http://www.youtube.com/watch?v=0iJlpR9ELsM&feature=my_liked_videos&list=LLZQfTI04wioPuSLcAg_wjwA
2012-04-04 18:08:00

Author:
dermZ96
Posts: 86


You don't need to tweak the splitter - just hook the minus to left and positive to right (you inverted those).
And the invert output of splitters is broken. Normally, "inverting" means to do 100-signal, so a 25% becomes 75%. On the splitters and combiners, it changes 25 into -25. It just exchanges the + and the -, which is an error - since it shows a NOT icon. So to avoid confusion, I wouldn't use it.
2012-04-04 23:54:00

Author:
Unknown User


i wouldn't say it's broken, i'd b more inclined to say your interpretation of it is a bit off.
An inverted combiner will output the same as if you apply not gates to both inputs of a normal combiner, so the inverting is happening on both the inputs.
An inverted splitter will output the same as if you apply not gates to both outputs on a normal splitter, therefore the inverting is happening on both the outputs.
2012-04-05 08:31:00

Author:
evret
Posts: 612


But it's all the same isn't it?2012-04-06 10:38:00

Author:
dermZ96
Posts: 86


Nahnahnah... Inverted splitter and combiners (or at least one of them) actually exchange the plus and minus outputs. It doesn't act like NOT gates. That's what I call an error. Perhaps they changed it in an update, but last time I checked it didn't do like NOT gates, which is what I say it's broken - since the icon of the tweak is the one of a NOT gate. But if they fixed it, what he did on the video wouldn't work, since the ship would be moving... Oh, right, it would still work in the video because it would move 100% in both ways when not pressing on the stick. But I tested it while making my health meter toolkit and feedback loops and it didn't work as on the video (I just looked back, and both wires are ON so it does work like NOT gates here). So it either means they fixed it, it was only with the combiner or I just have no memory...2012-04-07 17:19:00

Author:
Unknown User


it hasnt been changed, but think about it for a sec

(25) --------------------------I + I
................................ I O I------------ (-50)
(75) ---------------------------I - I

(25) ------NOT----(75)-----I + I
................................I O I------------ (+50)
(75) -------NOT----(25)-----I - I

in both the above examples it is a normal combiner (not inverted), you can see that the sign on the output is the only thing to change but this is done by inverting both inputs. it is not broken at all
2012-04-07 17:38:00

Author:
evret
Posts: 612


I realised it while looking at it. But I think I remember using the inverted value on a combiner/splitter with a 25% going in plus and no wire in minus, and it ended with minus 25. But yeah, my memory is probably playing me tricks. I guess it was so long ago that I didn't understand what it was doing back then so I though it was broken...2012-04-10 03:02:00

Author:
Unknown User


one day i'm going to get someone to sit with me and explain all of this in crayon because, quite frankly, i'm intimidated by the minds on this forum. i go through this stuff over and over and still can't follow it. i've done some reasonable logic myself and been proud of solving a little problem here and there, but this is brain surgery to me2012-04-10 20:44:00

Author:
GribbleGrunger
Posts: 3910


LBPCentral Archive Statistics
Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Datenschutz
Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.