Archive: 3 posts

---

I have a sackbot that needs to be emitted (so I can only use tag sensors not wires) and I need to make it so that when this sackbot enters the back layer of a room it will trigger that tag sensor on the bots microchip. So, I set the tag sensor to same layer, but when the tag appears, nothing activates. Any ideas?

2011-08-29 01:51:00 Author: Trader347 Posts: 57

---

Make sure the tag is not strapped to a thin piece of whatever, it needs to be on a thick layer to have the tag sensor pick it up. One of my levels uses sackbots that need to sense players' locations pretty accurately inside of a building setting, and I found that using a large chunk of invisible holograph and an impact sensor was much more accurate than using radial tag sensors (which can be surprisingly inaccurate). It has the advantage of letting you define precisely map out the volume of a room or floor and anything that steps inside that volume will trigger the impact sensor.

2011-08-29 02:09:00 Author: Chazprime Posts: 587

---

Thanks, that was my problem. I will strap the tag to an invisible hologram that's a layer thick.

2011-08-29 02:32:00 Author: Trader347 Posts: 57

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.