Archive: 6 posts

---

I was working on a level, with a sackbot being emitted and doing a recording of running down a hill. However, when emitted, the sackbot starts flying in the air and then just stay still. I have tried rerecording it and replacing it. Does anyone have a solution?

2011-08-14 21:16:00 Author: Undarivik Posts: 442

---

Just record the sackbot running down the hill and record the voice, what could be the problem???

2011-08-15 02:27:00 Author: zzmorg82 Posts: 948

---

The problem is, the recording just goes wild or does nothing. By recording I mean what the Sackbot does.

2011-08-15 03:29:00 Author: Undarivik Posts: 442

---

I'm not sure if it's the problem, but make sure you're recording the sackbot from EXACTLY where you emit it. Sometimes if it's a little offset it does strange things. Or maybe set it to "loop absolute", unless you desperately need it to only do its actions once Also check the emitter's settings.

2011-08-15 12:31:00 Author: RabidJellyfish Posts: 130

---

If all you need is for the sackbot to run right then you could do that without making a recording at all. Put a controlinator on the sackbot's chip and wire a battery (or timer, or whatever logic you need) to the controlinator's left stick input.

2011-08-15 18:06:00 Author: Dr C Posts: 122

---

Thanks. That should work fine.

2011-08-15 18:17:00 Author: Undarivik Posts: 442

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.