Archive: 5 posts

---

For example, there is a switch to grab that moves the sliding door to the front layer so the room is closed, and then if I grab it again, it will open again which will make the door go back to the middle layer.

2011-08-05 00:32:00 Author: PetStars Posts: 91

---

Put 2 separate in/out movers on a selector switch, and have a grab sensor wired to the selector so each time you grab it it switches.

2011-08-05 01:06:00 Author: Brannayen Posts: 438

---

that should work. here's a way to do it with 1 mover. You will need: Grab sensor Toggle switch Not gate direction combiner in/out mover Connect your grab sensor to the toggle switch. Connect that toggle switch to the NOT gate, and one input of the direction combiner. Connect the NOT gate to the other input of the direction combiner. Then connect the combiner to your mover. Just set the toggle so that the door is in the correct initial position at start up. Now every time the material is grabbed, the door switches positions/directions.

2011-08-05 02:15:00 Author: tdarb Posts: 689

---

Connect your grab sensor to the toggle switch. Connect that toggle switch to the NOT gate, and one input of the direction combiner. Connect the NOT gate to the other input of the direction combiner. Then connect the combiner to your mover. ...or just connect the grab sensor to the cycle input of a two-port selector, and connect the selector's two outputs to the direction combiner.

2011-08-05 18:46:00 Author: Aya042 Posts: 2870

---

Yeah Aya, I think you are right. That is probably the most thermo efficient, and would eliminate a frame of delay. I just find Toggles easier to glance at and tell where they are set, especially when zoomed out.

2011-08-05 22:45:00 Author: tdarb Posts: 689

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.