Archive: 8 posts

---

First of all im not sure if this belongs on this thread, 1. because i'm telling you a discovery, but 2. I'm also asking for help. But putting those matters aside I have something to share. So for my shooter level, there will be an ammo count, with 60 bullets. And So I started using selectors to go throughout the numbers. When everything started getting all Laggy. (Btw the selectors at 60) And the more wires I hooked up the laaggyier (not a word) it got. And my thermo is barely hitting the first bar line! So i've concluded that Selectors=Lag. But my main question is will it affect my gameplay? And also if it does, can there be another way to make an ammo count?

2011-07-21 00:39:00 Author: fighterwindplus Posts: 403

---

I'm pretty sure it will not affect your gameplay. The circuit boards and wires are not visible in play mode. The only reason it lags is because there is a lot of activity in one place. It happens to me alot. Hope it helps .

2011-07-21 00:45:00 Author: Sackpapoi Posts: 1195

---

Hmm okay thx for the advice

2011-07-21 00:49:00 Author: fighterwindplus Posts: 403

---

This happens to me a lot. It helps if you separate the selector into 2 parts. Give the first selector 10 ports. Have the first and last port go into a combiner (top-negative Bottom-positive) going into the cycle input of the second selector with 6 ports. Hook up the outputs of the first selector into the first digits of your ammo counter and the outputs of the second into the second digits.

2011-07-21 00:50:00 Author: Zero10100 Posts: 385

---

Hmm okay i'll try that, becuase everytime I open the MC it goes ultra Lag on me, i'll try that.

2011-07-21 04:30:00 Author: fighterwindplus Posts: 403

---

Might just be lag due to wire path calculations. Try dragging your logic to a piece of material outside the chip, I use that technique to get rid of microchip lag.

2011-07-21 15:27:00 Author: Radishlord Posts: 706

---

Yep it's wire calulation, sperate them to diffrent microchips

2011-07-21 15:56:00 Author: Shadowriver Posts: 3991

---

yeah i realized that because i moved the Mc with selector on it, but there was still lag, so I just go a new controlinato all together.

2011-07-21 21:28:00 Author: fighterwindplus Posts: 403

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.