Archive: 3 posts

---

Can anybody think of a way to make a sackbot fall over on the ground and lay there dead? I've tried activating a gyroscope, but it looks like they are floating above the ground.

2011-06-27 21:35:00 Author: Unknown User

---

Hi. I was messing around with a bot about it. Its not totaly convincing but start with this. Use a sequencer inside the bot about 4-8 bars and put in the first two lines a battery that activates an external gyroscope (obviously pointing down) and a mover with the down speed set to -[something (2-5 possibly)] and span them from the start to end (or near the end) of the sequencer. At the third line and the last one or two bars of the sequencer put an anti-gravity modifier and set the Dampening to 100%. Depending on the height the bot will be when get hit, you might need to adjust the sequencers speed or move the battery (of the gyroscope) and the mover accordingly. Actually alternatively you could check with a sensor whenever it hits the ground and then activate the anti-gravity. Hope this will give you a start.

2011-06-27 22:37:00 Author: zupaton Posts: 167

---

Thanks for helping me out! I've managed to get it working pretty well. Before I had the gyroscope sideways instead of upside Down and I hadn't thought about the antigravity tweaked.

2011-06-27 23:38:00 Author: Unknown User

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.