Archive: 4 posts

---

There is probably an easy soloution to this, but I'm pretty rubbish at logic, still trying to learn has I go. Okay I want to use a randomised pattern, to turn on both holographic material and power a bounce pad. I basically want it so the randomiser colours a platform and also powers the same platforms bounce pad, I tried a lot of things and i can't figure it out. Maybe I'm just kinda stupid or something.. If this question has been asked before, I apologise, I did try to the search function here, but it didn't turn up anything.

2011-06-23 22:11:00 Author: sorrowthedark Posts: 125

---

If I'm reading this right, you want one randomizer output to perform two actions, right? Easiest way is to go from the randomizer to a circuit node (created by grabbing an output of a piece of logic then clicking an open space on any microchip), then output from that circuit node to the platform/bouncepad combo. For example, if you have 5 platforms each with 5 bouncepads, you'll need 5 circuit nodes, each with two outputs - one to the platform and one to the corresponding bouncepad. I hope that answers your question.

2011-06-23 22:15:00 Author: shane_danger Posts: 283

---

thank you I'll go try that now I did that, and it works thanks for your help. I forgot about nodes, and was orignally using a directional spiltter. what an numpty I am.

2011-06-23 22:20:00 Author: sorrowthedark Posts: 125

---

nice, glad it worked!

2011-06-23 23:42:00 Author: shane_danger Posts: 283

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.