Archive: 2 posts

---

http://playstationeu.i.lithium.com/t5/image/serverpage/image-id/191977i7D8ED891A182C9EC/image-size/original?v=mpbl-1&px=-1 Is there an easier way? What I mean is if you look at the pic I've posted you can see I've used the X/OR gates as cut off by running in two feeds from the same timer to cut off the use of that signal. On another note this system that I've built here run fine for what I'm trying to build.. What this system doz is... It is for a sac bot that dose its own thing ( witch is on a different chip to this) but at timed point you have to interact with the sack bot by clicking on a point in the level some were. Now what this chips for . Is if you choose an action it holds the other actions you could have chosen till you finish the action that you are doing. If you understand that ..

2011-06-11 10:46:00 Author: Unknown User

---

just say you have 2 inputs, input A and input B, your saying you want input B to only be able to pass a signal through while input A is inactive? i think what you talking about is an AND NOT setup, simply place an AND gate with 2 inputs, connect a NOT gate to one input then input A to the NOT gate, then wire input B to the other input of the AND gate. there are quite a few ways to achieve the same thing, depending on your needs you may find that a selector could be more useful, as with a selector- any input will override all the inputs higher up the selector.

2011-06-11 11:22:00 Author: evret Posts: 612

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.