Archive: 3 posts

---

I am working on a very ambitious haunted mansion level which is supposed to start with a cut scene but I have hit some snags that have stopped me from getting any further. The cut scene starts by looking at the full moon and slowly pans down to a thunderstorm and then finally the haunted mansion itself. The scene consists of about 5 camera but on a few of the transitions it pans back up to where that camera had started before it finally goes onto the next camera. After asking around on a few other forums the answer I kept getting was to use sequencers. Every time I put a camera down on a sequencer it seems to take away my ability to have transitions like pans and fades. The only answer I have been given to this second problem is to overlap the cameras on the sequencer but that isn't working for me. I could really use some guidance on this one (what am I doing wrong!) so I can get back to working on this level. Thank you

2011-02-18 05:38:00 Author: toothygrin Posts: 3

---

Ok I know nothing about this so this is a shot in the dark, but can you tie the cameras on the sequencer to "actual" cameras off the sequencer, so that the one on the sequencer just act as queue's? That was it, don't call me dumb, I've never made a scene but I need to start learning how. Also there is a cut scene tutorial somewhere on here.

2011-02-18 05:43:00 Author: Gutz Posts: 175

---

That's not a bad idea but it is still just a work around I would prefer to just get it to work the way I intended but thanks for the suggestion.

2011-02-18 05:55:00 Author: toothygrin Posts: 3

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.