Archive: 3 posts

---

Here is a new thread where I will post tutorials to teach the community. I will try to update this weekly, so check back soon! TUTORIAL COUNT: 1 ----------------------------------------------------------------------------------------------------------------------------------------- Wall Jump: Difficulty: 5/10 Fun Factor: 8 Video Link: N/A 1. Get two basic movers, two and gates, and two impact sensors. 2. Make one impact sensor require a tag called LEFT WALL, and make the other require a tag called RIGHT WALL. 3. Make sure the mover by left wall is facing to the right, and vice-versa. 4. Set the mover speeds to 25 for Left-Right speed as well as Up-Down speed. (On both movers.) 5. Double check and make sure the strength is maxed out, as well as acceleration/decelleration. 6. Connect the impact sensors to the corresponding AND gates, as well as the X button on the recieving DCS. 7. Put tags on the walls you want to wall jump on. 8. It's also a good idea to shrink down a piece of hologram as far as it will go in SMALL GRID and line your walls with it. (DON'T FORGET TO TAG THEM TOO! ) I hope this was good for my first LBP2 Tutorial! Thanks for Reading! *****PICS COMING SOON!*****

2011-02-11 23:19:00 Author: Green-Tomato Posts: 140

---

Just some feedback, i'd make it more bright, add some colour. Make it attractive, look at mine (In the sig) That will get it more recognised...

2011-02-12 16:13:00 Author: Bang126 Posts: 157

---

Okay, thanks!

2011-02-12 18:28:00 Author: Green-Tomato Posts: 140

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.