Archive: 6 posts

---

So I was just wondering... You know how you can create flat planes of material? I usually use this to put like gates or something in the background of my levels... But recently I've needed some flat planes of wood to cover up certain areas of a contraption I'm working on.. Yet it shows the plane of wood above my actual material of the contraption. Is there anyway to smooth out those edges so it blends in with the material? It's of the same material obviously. I'm using the beige wood for the contraption...and to cover up certain holes in it, I've used beige wood flat planes, but it shows the planes on top of the actual wood. I hope I'm making sense lol. If someone knows what I'm talking about, is there anyway to flatten those out? Some tool or trick maybe? Thanks!

2011-02-05 09:19:00 Author: ShelboTron Posts: 9

---

The best way I've made to cover things like that, its I simplt spread the thin wall covering uo, across the wall or area that I want covered, so even if you only need a tiny bit covered, try to cover the entire wall. Hope that Helps!

2011-02-05 09:39:00 Author: Silverleon Posts: 6707

---

I know what you're talking about, but unfortunately I don't think this is possible, though it would be pretty awesome if it were. I was working on a level in LBP 1 that had a TON of logic built right into the frame of the level. What I did was cover it up with the flat pieces then bolted them on with standard bolts and dressed it up with some decos and things. I liked the way it turned out.

2011-02-05 09:45:00 Author: Ninja_Gnome23 Posts: 198

---

Ah okay. Thanks guys...I didn't think it would be possible, but just wanted to check And yeah I guess I could find some decos to cover it with! It would definitely be a super nice function to have if the flat material just smoothed out with the material under it rather than looking so blocky lol. Oh and on a side note...How in the WORLD do you change the poisonous gas color?? I can't figure it out. I hold square for "more" and all it says is 'use' or 'tutorial.' So I select the gas tool, hold it over the object I want to turn into gas...still nothing. I'm holding square over the object for like 5 seconds and nothing happens. I don't get a tweak menu. It's this default strange green color. lol any help?

2011-02-05 10:06:00 Author: ShelboTron Posts: 9

---

Try turning the object to gas, use popit to select the object, then press square. This SHOULD bring up the color tweak menu for the gas, also the ability to turn off that horrid buzzing noise.

2011-02-05 10:10:00 Author: Ninja_Gnome23 Posts: 198

---

Sweet! That worked Thanks so much.

2011-02-05 10:21:00 Author: ShelboTron Posts: 9

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.