Archive: 21 posts

---

First of all, what is a cutscene? A cutscene is basically a level that tells a story, rather than play a game. You could say that it's like you create a movie - and that is precisely what you do. So, I assume that you've found this nifty little option in the "Level Properties" section of the Toolbar. If not, then it's on the last page, at the very top. The default option should be "Cooperative". Change it to "Cutscene". Now that you've got the setting correct, it's time to make your movie. Place all of the props, sackbots, magic mouths, fireballs, blablabla, etc. Whatever you need to make your movie. You've got your props, you've got the setting to "Cutscene", and now it's time for the first day of recording. ACTION! Place down a microchip somewhere in you level. Anywhere, really, just as long as it is on something that does not get destroyed. After you place the microchip down, put a "Tag Sensor" on its circuit board, and then put a "Sequencer" next to it. Link the Tag Sensor to the Sequencer, and then open up the Sequencer. This Sequencer will act as the "Timeline" of your movie. Now is where we actually work with the cameras. Place a Movie Camera onto the sequencer, and tweak it. Move the angle, shakiness, etc. however you want, and exit out of the tweak menu. Select the camera, and use up and down on the RIGHT analog stick to adjust the time you want that shot to be active. But now what do you do? How do you get one camera to transition to the other smoothly? Put another Movie Camera BELOW the original, and adjust it's length. Make sure that they both overlap on the timeline. But WAIT! When you put it into Play Mode, it doesn't do anything! This is where the "Tag Sensor" comes into play. Place a "Tag" right near the microchip (because the Tag Sensor on the microchip is linked to the timeline). Now, go into Play Mode, and your movie should work! BUT WAIT! How do I end my movie? Go into the toolsbar, and select "End Game" in the World Tweakers. It's near the bottom on the second page. Place it at the end of your timeline. This method is for those who are slightly experienced with LBP2, but it's very logical, and a little easier to understand. If anybody needs any more explanation on this tutorial, please comment and I will be happy to answer any questions that you might have! -FreakySacky

2011-02-04 18:01:00 Author: Unknown User

---

imo its better to use a battery instead of a tag sensor...

2011-02-04 18:13:00 Author: fodawim Posts: 363

---

could you write up something that includes characters acting, changing bahaviours, etc... ?

2011-02-04 18:35:00 Author: wizaerd Posts: 159

---

imo its better to use a battery instead of a tag sensor... Really? Huh, I'll have to try that. Thank you. Anyways, the tag sensor works just as well, so I don't really see how it would matter...

2011-02-04 21:42:00 Author: Unknown User

---

could you write up something that includes characters acting, changing bahaviours, etc... ? I would suggest acting AFTER you place and tweak your cameras, so it is easier to put timing. To make your characters act, tweak a sackbot, and set its controls to "acting". After the countdown, if you've followed the instructions above, your movie should play, but you are still recording the sackbot. Then you can just move your character around. Now, let's say you wanted a sackbot to move up using a "Mover", but you wanted it to work with the timeline. Once you've put the mover onto the Sackbots circuit board, place a "Tag Sensor" on the timeline, and connect it to the mover on the sackbot. This method can be used for any property you want to put on a sackbot - whether it be gravity, destroyers, material changers, etc. I hope that you understand, because I'm not the best at explaining

2011-02-04 21:55:00 Author: Unknown User

---

does this work if you have a cutscene / film and then a playable section afterwards?

2011-02-05 11:52:00 Author: Unknown User

---

Where is your sackboy during the film?

2011-02-05 21:00:00 Author: captain sack Posts: 88

---

Wherever the entrance is. If you want your sackboy to be part of the video and act, then you have to change a sackbots costume to "Copy Player 1".

2011-02-05 21:42:00 Author: RotomGuy Posts: 28

---

does this work if you have a cutscene / film and then a playable section afterwards? No, this method only works if you are making the WHOLE level a cutscene. If you want a playable portion after your cutscene, instead of changing the level setting to "Cutscene", change it to "Cooperative" or "Versus". Then, open the timeline, and remove the "Game Ender". Then, all you need to do is tweak the sequencer, and make sure it doesn't loop. Your sackperson should then be at the Entrance.

2011-02-05 23:55:00 Author: Unknown User

---

All I want to know is how to make the slow-panning shot, where the camera very slowly moves across from one frame to another. Soft pan and hard pan same to do exactly the same thing

2011-02-06 19:15:00 Author: agsrule Posts: 89

---

Still having problems with the camera going off into nowhere. I have the tag sensor well within range, the tag sensor connected to the camera, though it just never activates.

2011-02-13 20:30:00 Author: Unknown User

---

If the tag sensor method isn't working for you, then I would suggest trying the method stated by fodawim previously - linking a "Battery" to the sequencer.

2011-02-13 22:35:00 Author: Unknown User

---

If the tag sensor method isn't working for you, then I would suggest trying the method stated by fodawim previously - linking a "Battery" to the sequencer. Thanks, the battery method seems to be working.

2011-02-14 04:01:00 Author: Unknown User

---

I want to get my cutscene to end, but lead directly onto another level that I've created, in a similar way to the story mode. If I put an 'end game' on the end of my sequencer, it doesn't send the player to the next level, it just finishes. It's confusing me, if the player was to 'skip' the cutscene, it sends them to the level I want it to (I have a level link hidden in the cutscene), but if the player was to let the scene play out it would send them back to their pod. Any help with this would be massively appreciated. Its driving me crazy =S

2011-02-14 17:40:00 Author: Unknown User

---

I want to get my cutscene to end, but lead directly onto another level that I've created, in a similar way to the story mode. If I put an 'end game' on the end of my sequencer, it doesn't send the player to the next level, it just finishes. It's confusing me, if the player was to 'skip' the cutscene, it sends them to the level I want it to (I have a level link hidden in the cutscene), but if the player was to let the scene play out it would send them back to their pod. Any help with this would be massively appreciated. Its driving me crazy =S Can you put a Counter at the end of the sequencer set to 1, and then hook it up to the Level Link so that it activates when the sequencer ends? That should work I think

2011-02-14 18:24:00 Author: Hallm3 Posts: 252

---

Can you put a Counter at the end of the sequencer set to 1, and then hook it up to the Level Link so that it activates when the sequencer ends? That should work I think I've just tried it, but because I took the end game from the end of the sequencer and replaced it with the counter, it just stayed on the last camera angle.

2011-02-14 18:53:00 Author: Unknown User

---

I am kind of wondering the same thing. I just want a quick little cutscene at the end of my level where a sackbot dressed as a monster will say BLAH BLAH BLAH and then disappear so that you can then proceed to the end of the level. I want to use gestures and text and then the monster disappears and you are free to walk the rest of the way to the end of the level. Thanks in advance. I'm cookin up somethin nice and that is the only thing I can't figure out how to do.

2011-02-15 02:14:00 Author: tru3_skitz0 Posts: 114

---

I figured it out. Put a battery on your sequencer and link the battery to your level link. Whenever the sequencer goes on the battery, it will take a few seconds for it to automatically activate the level link. Then the movie will fade out, and your target level will start to play.

2011-04-18 02:10:00 Author: Unknown User

---

A huge thank you for telling me how to end my cutscenes, I thought if I put the end game option in there it'd end the game. O.O But looking back, I should have tried it anyway. :L /repeatedlyfacepalmsself

2011-04-19 21:02:00 Author: abyssalassassin Posts: 717

---

??? batteries are made for sequencers. i would always go to them as my first option.

2011-04-20 09:51:00 Author: nerzdadestroyer Posts: 1527

---

I had no idea where the end game tweak was, and was desperately searching for it! Thanks!

2011-04-23 09:48:00 Author: tomodon246 Posts: 624

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.