Archive: 7 posts

---

Hello! As you may have seen, the bee, or flying Vehicles. I get how to use the controllinator to make something fly, but I havent been able to figure out how MM made the vehicles have an idle mode! Ive tried almost everything I know, but this is impossible for my level of logic knowledge concerning the new switches and stuff in LBP2. I would love anyones input, as I have a vehicle built and ready to go, all I need is an idle mode. Thanks!

2011-02-01 00:51:00 Author: grayspence Posts: 1990

---

what do you mean by idle mode? if you want something to happen when no buttons are pressed you can connect all of the outputs to and inverted 'or' switch.

2011-02-01 01:10:00 Author: slidedrum Posts: 189

---

if you just want it to stay flying even when you arent triggering a mover, use a gravity tweaker on your vehicle. you can even hook it up to the ps button on the controlinator to have it only be on when you are in the vehicle.

2011-02-01 01:27:00 Author: Deftmute Posts: 730

---

if you just want it to stay flying even when you arent triggering a mover, use a gravity tweaker on your vehicle. you can even hook it up to the ps button on the controlinator to have it only be on when you are in the vehicle. That wouldnt work. Ill tell you what I mean below. what do you mean by idle mode? if you want something to happen when no buttons are pressed you can connect all of the outputs to and inverted 'or' switch. What I want to happen, is for my Helicopter to sort of hover slowly up and down when its stationary, like an actual Helicopter.

2011-02-01 01:32:00 Author: grayspence Posts: 1990

---

Wire a NOT Gate to both the joystick directions and wire those into an AND gate. The AND gate should then activate when the joystick is centered and you can use that to enable your idle behavior. Do movers work on a sequencer? if so you could place a pattern of movers on the sequencer and loop it when the joystick is centered.

2011-02-01 02:49:00 Author: Osprey71 Posts: 93

---

If you place the bee (attack or pickup mode) you can let its logic show, and I think they have a specific logic secton for "hover" mode as they called it. It has a note specifying what it is, I would try to learn from that.

2011-02-01 03:00:00 Author: booXely Posts: 654

---

Hmm.. I think Ill make it based on suggestion and if I get stck, i'll look at MM's way of doing it! Thanks for your input!

2011-02-01 03:54:00 Author: grayspence Posts: 1990

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.