Archive: 4 posts

---

I need help with starting and stopping cog rotation When I open a door. I have a cog decoration attached to a thin layer which is rotating via motor bolt. I open the door with a key which is triggered by a tag sensor , while the door opens I'd like the cog to start spinning then stop after 2 seconds , Any help with this is much appreciated as I can't seem to get the result I'm after

2011-01-27 03:25:00 Author: ooDEANOZoo Posts: 3

---

Make a selector inside of a microchip. Make the key tag activate the microchip. Make the first output on the selector set to the cog, and the second output to nothing. Make a timer set to 2 seconds and connect it to output 2 in the selector. That will make the cog start when the door opens, and stop after 2 seconds.

2011-01-27 03:29:00 Author: Daldrez Posts: 63

---

Thanks for the reply but I dosent seem to be working here is a picture of what I've done http://i1084.photobucket.com/albums/j415/ooDEANOZoo/ef0d71d5.jpg?t=1296103625 Edit: I've fiddled with what u said and it working now here what it looks likehttp://i1084.photobucket.com/albums/j415/ooDEANOZoo/7276f116.jpg Just one more question , I Also have a door that I'd like to have a spinning cog spin when it opens, then stop and then spin when shuts then stop

2011-01-27 04:51:00 Author: ooDEANOZoo Posts: 3

---

Well just make two different key tags for opening and closing and copy what you did for that door, and viola.

2011-01-27 11:50:00 Author: Daldrez Posts: 63

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.