Archive: 2 posts

---

Does anyone know if there is a way to change the control scheme of the controlinator, for example, a player is controling a car using the dcs and the drives into the water, and a water sensor changes the dcs control scheme to a sub-marine or something. Is theis possible?

2011-01-26 17:37:00 Author: Unknown User

---

Yep, it should be - First make sure that the DCS you are using are set to transmit its signal using a specific color and label. - Then create two Microchips each containing a DCS set to receive signals with the same color and label as the transmitting DCS. Tweak both chips and name chip 1 "car" and chip 2 "Sub". - Place a Water Sensor on the object you want to determine which controle scheme is active. Wire the Water Sensor to the buttom of the chip named Sub and to a NOT-Gate. Wire the output from the NOT-Gate to the buttom of the chip named Car. - Now the Car chip will only be active when the object is NOT in the water, and the Sub chip will be active when the object IS in the water. Use the wires from the DCS located in the Car chip to control the "Car features", and use wires from the DCS located in the Sub chip to control the "Sub features", and you should be good to go I hope this answers your question?

2011-01-26 17:57:00 Author: Slaeden-Bob Posts: 605

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.