Archive: 13 posts

---

please read the messages in the level to learn how to operate cranes. you must build a bridge to get to end of the level. demo level of crane Also there is a 2player co-op crane for teams to build bridge http://lbp.me/v/wtdn1z

2011-01-23 05:49:00 Author: TSFRJ Posts: 249

---

Anyone tried it yet any comments on how the crane works? if the controls work good or how to better improve the crane actions or look?

2011-01-24 03:10:00 Author: TSFRJ Posts: 249

---

Really like the tech, but perhaps a crane stuck on the ground would be a better alternative? Perhaps a button to mount your truck to the ground while you lift stuff, the truck often behaved wierd when lifting things. Would be really nice to have a level with bridge building puzzles i have to say. And one more thing, when changin layers wouldn't it easier to go in and out with r1 and r2 only? Instead of having three buttons for each layer. Note that I didn't finish the level because I felt it was going a bit to slow so that buttong config may be needed?

2011-01-24 07:10:00 Author: Unknown User

---

how do you ger the 2 buttons to do all 3 layers? also while the hook is in sticky mode rasing the hook all the way up to the boom stick hook to boom causing the gyro on hook to affect the crane thanks im still learning the layer change logics

2011-01-24 07:24:00 Author: TSFRJ Posts: 249

---

how do you ger the 2 buttons to do all 3 layers? also while the hook is in sticky mode rasing the hook all the way up to the boom stick hook to boom causing the gyro on hook to affect the crane thanks im still learning the layer change logics You can change the in/out mover to move in once or move out once instead of move to back, move to middle and move to front. Then you just map move in once to r2 and move out once to r1.

2011-01-24 08:04:00 Author: Unknown User

---

sorry the bridge process is to slow i'll try shorting the pridge to 1 plank across instead of 5

2011-01-24 08:32:00 Author: TSFRJ Posts: 249

---

okay republished level so that players only have to place 1 bridge part to get to scoreboard. but i still havent been able to map all 3 layer changing to 2 buttons or joystick

2011-01-24 20:58:00 Author: TSFRJ Posts: 249

---

okay republished level so that players only have to place 1 bridge part to get to scoreboard. but i still havent been able to map all 3 layer changing to 2 buttons or joystick Hm, thats wierd. I will try it again now. EDIT: Worked much better now with lesser bridge pieces to get stuck to, as i said before, really cool tech make som cool puzzles for it.

2011-01-24 21:14:00 Author: Unknown User

---

okay republished level so that players only have to place 1 bridge part to get to scoreboard. but i still havent been able to map all 3 layer changing to 2 buttons or joystick If you need help I might be able to help you. I'm not sure what you're doing wrong, But I have a flying sackybot I'm able to push in and out one layer at a time.

2011-01-24 23:40:00 Author: LukeCF Posts: 790

---

i just need a guide on the logic then it free up a button. But it need to be where pressing L2 alwas moves a layer back and L1 goes a layer foward but the 2 buttons have to use all 3 layers

2011-01-24 23:43:00 Author: TSFRJ Posts: 249

---

Dude, first off... Bravo! I really like the truck mechanics. The sticky crane has bugs to be sure but i think if you mapped a rotator to L2 R2 while L1 R1 changes layer it would be able to function more efficiently. I honestly dont think all 3 layer are required to make a great game with this. Note, I couldn't finish the level because i couldn't get past the score bubbles for some reason.

2011-01-25 00:39:00 Author: Norseman Posts: 17

---

okay im remaping the layer changing controls to the updown of the left joystick look for new level LBP2 Crane 2.0 soon I was wrong and i apologise just placing a layer changing chip with default settings to crane chassie then hooking up/down of stick to it works fine for all 3 layers. now i have 3 more buttons to add more features yay. Thankyou guys for helping. by the way i'll have the current level republished with layer change mapped to left stick published in about 30minutes of this post

2011-01-26 01:14:00 Author: TSFRJ Posts: 249

---

ok level is republished with the left stick operating the layer change. just use left stick same as you would sackboy to cahnge layers

2011-01-26 01:54:00 Author: TSFRJ Posts: 249

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.