Archive: 3 posts

---

I need to make a 3 way lever spawn different objects, but only one object can be spawned at a time. Also it is on the 1st object by default.

2011-01-21 13:14:00 Author: jonlolz Posts: 155

---

I'm not sure about what you're asking, but if I guessed correctly you just need to use a selector with 3 outputs: link the 3-way switch to the cycle input of the selector (the one at the bottom), be sure to demit (check rtm223's tutorial level) the other objects, and you're done

2011-01-21 13:36:00 Author: Shadowheaven Posts: 378

---

I'm taking a guess that you want three different directions to spawn different monsters, am I correct? If so, it should be fairly easy. When in the "up" position, the lever should send no signal. When to the "left", it sends a negative signal. And when to the right, it sends a "positive" signal. Just use those two signals created by a directional splitter and then the lack of a signal for the upright position to activate different emitters. Use a XOR gate on both outputs (positive and negative) to detect NO signal, and use this for the upright position.

2011-01-21 15:14:00 Author: dr_murk Posts: 239

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.