Archive: 3 posts

---

So I've finally decided to play around with the new LBP2 creatiol tools, and I'm currently trying to use an in/out mover. I am seeming to have trouble though. So right now I got it to work fine setting the tilt function onto an direction splitter and then taking both directions and hooking each one up to a mover, one with the function of moving in, and one with the fiction of moving out, depending on if I tilt it left or right, but when I try to set it up to move in and out using the D'pads up and down, I get nothing and I am not sure why seeing as how I cannot really test this in create mode. After some thought the D'pad seems a poor choice for the movement anyways, but It bothers me none the less. Am I doing something wrong? Or does the dpad have a function other than what I'm grasping? Any help would be nice, thank you.

2011-01-19 23:04:00 Author: LukeCF Posts: 790

---

After some thought the D'pad seems a poor choice for the movement anyways, but It bothers me none the less. Am I doing something wrong? Or does the dpad have a function other than what I'm grasping? Just have one In/Out mover, and connect the D-pad output directly into the In/Out Mover's input. Some of the Controlinator outputs generate positive and negative signals, and a negative signal causes the Mover to move in the opposite direction.

2011-01-19 23:14:00 Author: Aya042 Posts: 2870

---

Still not working. Oh. Notcied something new. Sack boy is still doing emotions while in my direct control, is that the [toggable?] problem? Success! Never mind, got it. Thank you for the help though.

2011-01-19 23:25:00 Author: LukeCF Posts: 790

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.