Archive: 3 posts

---

first create a chute to place a vertical piece of glass in. this will be controlling the x axis movements of sackboy. Attach the pistons for the x-axis movements to the glass in the chute. now create a horizontal chute for a horizontal piece of glass which you will attach the pistons that will control y-axis movement. Now make the block containing the sensors, making sure to have the up/down overlap with the left/right. attach a magnetic key switch to the system and attach that to the 3rd piston of the x and y axis. attach the up sensor to the first vertical piston set it to directional, then the down to the second piston set to directional and inverted. then attach the right sensor to the top piston and set it to directional, then the left to the middle set to directional and inverted. now when you move the glass pieces will slide in their channels without impeding movement of the other axis. note: * all pistons must be set to stiff *the glass will push and pull on the chute so be sure to glue it down make the chutes as snug to the glass as possible so the pistons can push or pull with out unnecessary extra movement (If this already exists then I apologize for repeat content)

2010-09-02 00:44:00 Author: Inferno Posts: 58

---

Logic Workshop (https://lbpcentral.lbp-hub.com/index.php?t=31753-Logic-Workshop&p=552773&viewfull=1#post552773)

2010-09-02 01:18:00 Author: Incinerator22 Posts: 3251

---

hmm... maybe it's me but my design came out to be different than the one in that thread. However, I may be mistaken.

2010-09-02 01:33:00 Author: Inferno Posts: 58

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.