Archive: 7 posts

---

Ive seen these lvls that people have made some kind of custom point bubbles, you run into them and u get the points and the thing disapears, i was wondering if anyone could tell me how to do this? it would add a little better feel to my lvls.. thanks!!

2010-06-19 13:36:00 Author: shadowsythe456732 Posts: 176

---

If it's what I think you mean they just stick decorations over the bubbles.

2010-06-19 14:32:00 Author: OneEyedBanshee Posts: 1370

---

There are 2 methods. 1 Get a thin layer of dissolve in the shape on your 'point' I'll use a coin as an example. Sticker the coin appropriately. Glue to a point bubble. Attach a proximity/player sensor to the dissolve. Wire the sensor to dissolve. Set the range on the sensor to be equal to the bubble collection range. 2 Put a decoration on the bubble sticker. (Much easier/accurate but you can only choose from decorations. Hope this helps!

2010-06-19 14:34:00 Author: Jedi_1993 Posts: 1518

---

To add on Jedi's dissolve thing, I've used it to make Rupees, but instead of a sensor, put a magnetic key on the bubble and a magnetic key switch (MKS) on the dissolve, switch MKS to inverted, so when the bubble is gone, the dissolve goes with it.

2010-06-21 02:13:00 Author: JspOt Posts: 3607

---

I have made a bunch of custom prize bubbles, mostly with stickers. I would like to point out that if you are tring to make a ring (sonic levels) you end up with a double image due to the reflective nature of the bubble. I got around this by making the prize bubble really small before attatching my disolve.

2010-06-21 08:38:00 Author: Strangepom Posts: 445

---

what i did was i took a thick layer shape, then cut a rectangle in it and put a creature brain inside. then i attached an invisible peice of Dark Matter under it. to cover the creature brain, i put an led light on top of it to add effect, then put a sensor switch on the light and attached it to the creature brain. the only problem with this is that it takes up thermo, i could only put like 13 in the lvl before it overheated. For the sonic ring i would try to make an invisible point bubble with a mag key on it then take a mag key switch and put it on the ring shape. i would glue the bubble to the top of the ring from the inside of it. then attach the mag key to the dissolve. that would barely take up any thermo and would look amazing in sonic lvls.

2010-06-21 20:49:00 Author: shadowsythe456732 Posts: 176

---

i could only put like 13 in the lvl before it overheated. Instead of using a creature brain for every rectangle, you could use OR switch logic so that each rectangle has an output to a single emmiter that emits a self-popping creature brain.

2010-06-21 20:57:00 Author: Incinerator22 Posts: 3251

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.