Archive: 3 posts

---

I'm having a little problem with my directional switch setup for the cannon on my pirate ship. This is my setup: I have 2 control sponges to pivot the cannon. 1 controls the up motion and the other controls the down motion for aiming. I have a dark matter block with the middle cut out. inside is a 3 way switch a winch on one side to pull it on for one direction and another winch on the other side to pull it the opposite way for the other direction. My problem lies with how I setup both grab switches and the 3 way. Do I set the grab switches to on/off and the 3 way to directional? or is it the other way around? I've been gone from LBP so long I've forgotten. LOL **** reality and it's busi-ness. LOL Any help with this matter would be greatly appreciated. Thanks, HP

2010-05-12 16:00:00 Author: Haleys_Papa Posts: 171

---

Set everything to directional, including the three-way switch, and invert the direction whenever necessary (the winches may need to be inverted, and the wobble bolt of the cannon as well, to get an intuitive setup). Make sure the winches' maximum length is longer than the distance they take when the 3-way switch is in the middle - that allows the other winch extra room to pull the switch in the opposite direction.

2010-05-12 16:24:00 Author: Holguin86 Posts: 875

---

Thanks a million buddy.

2010-05-12 16:46:00 Author: Haleys_Papa Posts: 171

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.