Archive: 7 posts

---

Have a strip of dissolve material over a gas pit that i would like to....*coughs* dissolve after a barrel rolls over it. To my understanding, dissolve material can be only ' activated' by a button? Anyone out there with workaround? TIA

2010-02-16 07:15:00 Author: Unknown User

---

Attach a mag key to the barrel, and a mag switch to the disolve, wire the switch to the dissolve, that's it.

2010-02-16 07:46:00 Author: Kern Posts: 5078

---

Yeah as KernelM says except for the bit about wiring the key to the dissolve. Ignore that as keys don't have wires. He means wire the mag switch to the dissolve and set it to 1 shot or on/off. I usually set mine to 1 shot. Just put the key on the barrel in the centre preferably and then place the mag switch and set the radius big enough to detect the key on the barrel when it gets to the point at which you want the floor to dissolve. You can use other switches too depending on exactly what you are trying to do but that's as easy as any.

2010-02-16 12:44:00 Author: mistervista Posts: 2210

---

As both of them said it is best if you use a mag key to activate near the barrel.

2010-02-18 17:41:00 Author: NinjaLukeI Posts: 89

---

Was there really any need to post? The question had already been answer so unless you had a simpler way to do it, there really was no need.

2010-02-18 21:36:00 Author: Kern Posts: 5078

---

Perhaps he felt left out?

2010-03-04 23:24:00 Author: Nakatsu Hime Posts: 59

---

*facepalm* This thread had been solved, Now, please can i request a lock?

2010-03-05 18:55:00 Author: Kern Posts: 5078

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.