Archive: 3 posts

---

I need to make a series of carts that are emitted from point A and they have to reach point B. The cart should be made of less layers possible, max 2 thick layer and one thin. I made the wheels out of glass but it doesn't seem a good solution? Should I pick rubber instead? The cart perhaps won't move only orizzontaly, but should flip 180?, even ride vertically, and have at least one grappable side. It's not a rollercoaster, so I can't use jet propulsors on it to move it vertically, the best I could come up with is with mag switches on the motor, and mag keys on the track. I can't change the track since I need quite some carts going on the track. So I must operate only on the cart and make it able to ride and flip when it reaches certain points. How would you solve this stuff? Now...I quite manage to make it go vertically even if with a non stylish and good looking solution, but I'm not convinced at all. Thanks in advance

2009-08-04 14:21:00 Author: OmegaSlayer Posts: 5112

---

Maybe making the fully functional rubber wheels should do it, the problem with the rollercoaster hybrid I read is that it's not really wheels it's just sort of a wheel shaped thing sticking out on the bottom of the cart (or am I wrong?) maybe putting a motor bolt on the wheels, and putting the strength of the bolt on 0 should do the trick.

2009-08-04 19:53:00 Author: Zhion5991 Posts: 164

---

I explained myself badly. Basically I need a "thingy" like the one that MM put on race in the first Indian level (sorry, don't know the English name), but the thingy must go even vertically and the platform where the sackboy stands must flip 180?. In my latest try I made 4 rubber wheels in the back layer connected with a 90? H, ---------------------------------- | | | | ---------------------------------- between the upper and lower set of wheels theres a one small grid space. On the central part I connected the rotating platform (on the mid layer) with a wobble bolt, activated by a mag switch; the mag switch is on the platform and the key is on the track. To add stability to the vehicle I have one track under the wheels, one over the wheels and one just inside the wheels. The thingy seemed to work fine, but when the mag key activates the wobble bolt, the thing gets struck to the walls/track.

2009-08-04 20:52:00 Author: OmegaSlayer Posts: 5112

Posts: 1077139    Threads: 69970    Members: 9661    Archive-Date: 2019-01-19

Aus dem Archiv wurden alle persönlichen Daten wie Name, Anschrift, Email etc. - aber auch sämtliche Inhalte wie z.B. persönliche Nachrichten - entfernt.
Die Nutzung dieser Webseite erfolgt ohne Speicherung personenbezogener Daten. Es werden keinerlei Cookies, Logs, 3rd-Party-Plugins etc. verwendet.